Mitsubishi A1SD75M3 User Manual page 557

12 CONTROL AUXILIARY FUNCTIONS
Carry out a machine zero point return.
Set the positioning data No. for
which the teaching will be carried out.
Select "Set the current feed value to the
arc auxiliary point ( Da.6 Arc address)"
in the write pattern.
Confirm the completion of the writing.
Move the workpiece to the circular
interpolation end point position
using a manual operation.
Select "Set the current feed
value to the end point ( Da.5
Positioning address/movement
amount)" in the write pattern.
II
(b) When teaching to the " Da.6 Arc address", then teaching to the " Da.5
Positioning address/movement amount"
Start
Move the workpiece to the circular
interpolation auxiliary point using a
manual operation.
Set the target axis.
Carry out a writing request.
Carry out a writing request.
I
• • • • • • • •
Using a JOG operation or manual pulse generator.
• • • • • • • •
Set the target axis in the buffer memory address [1103].
• • • • • • • •
Set the positioning data No. in the buffer memory address [1104].
• • • • • • • •
Set 60F in the buffer memory address [1105].
H
• • • • • • • • Set 2 in buffer memory address [1106]
• • • • • • • •
Confirm that the buffer memory address [1106] has become 0.
Using a JOG operation or manual pulse generator.
• • • • • • • •
Set 50F in the buffer memory address [1105].
• • • • • • • •
H
• • • • • • • •
Set 2 in buffer memory address [1106]
12 - 85
MELSEC-A