Mitsubishi A1SD75M3 User Manual page 268

5 DATA USED FOR POSITIONING CONTROL
Setting item
Cd.19 JOG speed
Cd.20 Speed/position changeover
enable flag
Cd.21 Speed/position changeover
control movement amount
change register
•
Set the JOG speed for JOG operation.
•
The value is set within the following range.
mm
-2
(×10 mm/min) (×10
0 to 600000000 0 to 600000000
•
Set whether to validate the control signal (speed/position changeover signal)
from an external source.
•
To change the movement amount for the position control during speed control of
speed/position changeover control, set the movement amount after changing to
position control.
•
Make the setting during the speed control of speed/positioning changeover
control.
•
The setting value is cleared to 0 at the next start.
•
Set the value within the following range.
mm
µ mm)
-1
(×10
(×10
0 to 2147483647 0 to 2147483647
5 - 178
Setting details
inch degree
-3 -3
inch/min) (×10 degree/min)
0 to 600000000
inch degree
-5 -5
inch) (×10 degree)
0 to 2147483647
MELSEC-A
pulse
(pulse/s)
0 to 1000000
pulse
(pulse)
0 to 2147483647