Mitsubishi A1SD75M3 User Manual page 37

1 PRODUCT OUTLINE
Understand the product functions and usage methods, the configuration devices
1)
and specifications required for positioning control, and design the system.
Install the AD75 onto the base unit, wire the AD75 and external connection devices
2) (servo amplifier, etc.), and connect the AD75 and peripheral devices. Check that
the AD75 operates correctly. (Single module test)
Using the AD75 software package, set the parameters, positioning data, start block
3)
data and condition data required for the positioning control to be executed.
Using the GPP function software package, create the sequence program required
4) for positioning operation. (When not using the AD75 software package, also create
the sequence program for setting data.)
Write the parameters and positioning data, etc., created with the AD75 software
5)
package into the AD75.
Using the GPP function software package, write the created sequence program into
6) the PLC CPU. (When not using the AD75 software package, also write in the
sequence program for setting data.)
Carry out test operation and adjustments in the test mode to check the servo
amplifier setting status and external connection device operation status, and to
7)
confirm that the designated positioning operation is executed correctly. (Debug the
set "parameters" and "positioning data", etc.)
Carry out test operation and adjustment to confirm that the designated positioning
8) operation is executed correctly. (Debug the created sequence program. When not
using the AD75 software package, also debug the set data.
Actually operate the positioning operation. At this time, monitor the operation state
9)
as required. If an error or warning occurs, remedy.
10) Service the AD75 as required.
11) Dispose of the AD75.
The following work is carried out with the processes shown on the left page.
Details
1 - 15
MELSEC-A
Reference
•
Chapter 1
•
Chapter 2
•
Chapter 3
•
Chapter 8 to Chapter 13
•
Chapter 4
•
Chapter 5
•
Chapter 8 to Chapter 13
•
AD75 Software Package
Operating Manual
•
Chapter 6
•
GPP Function Software
Package Operating Manual
•
Chapter 7
•
AD75 Software Package
Operating Manual
•
Chapter 7
•
GPP Function Software
Package Operating Manual
•
AD75 Software Package
Operating Manual
•
GPP Function Software
Package Operating Manual
•
Chapter 5
•
Chapter 14
•
AD75 Software Package
Operating Manual
•
GPP Function Software
Package Operating Manual
•
Chapter 4
•
Chapter 4