5 DATA USED FOR POSITIONING CONTROL
Storage item
Md.42 Target speed
Md.43 Zero point absolute position
Md.44 Movement amount after
near-point dog ON
Md.45 Torque limit stored value
•
During operation with positioning data
•
During interpolation
•
During JOG operation
•
During manual pulse generator operation : "0" is stored.
•
The "zero point absolute position" address is stored.
•
"0" is stored when the power is turned ON, and the zero point return basic
parameter " Pr.47 Zero point address" is stored when the machine zero point
return is completed.
•
The zero point absolute position value is changed when the current value charge
function is executed.
•
"0" is stored when machine zero point return starts.
•
After machine zero point return starts, the movement amount from the near-point
dog ON to the machine zero point return completion is stored.
(Movement amount: Movement amount to machine zero point return completion
using near-point dog ON as "0".)
The " Pr.18 Torque limit setting value" or " Cd.30 New torque value" is stored.
•
During positioning start, JOG operation start, manual pulse generator operation
...The " Pr.18 Torque limit setting value" is stored.
•
When value is changed to " Cd.30 New torque value" during operation
...The " Cd.30 New torque value" is stored.
5 - 154
Storage details
: The actual target speed, considering
the override and speed limit value,
etc., is stored. "0" is stored when
positioning is completed.
: The composite speed or reference
axis speed is stored in the reference
axis address, and "0" is stored in the
interpolation axis address.
: The actual target speed, considering
the JOG speed limit value for the
JOG speed, is stored.
MELSEC-A