Using This Manual (2 - Mitsubishi A1SD75M3 User Manual

Using This Manual (2)

The methods for reading this manual are shown below.
1) → 2) → 3) → 4) → 5) → Test operation → 6) → Actual operation
Chapter 1 PRODUCT OUTLINE
Chapter 2 SYSTEM CONFIGURATION
Chapter 3 SPECIFICATIONS AND
FUNCTIONS
Chapter 4 INSTALLATION, WIRING AND
MAINTENANCE OF THE
PRODUCT
Chapter 5 DATA USED FOR
POSITIONING CONTROL
5.1 Types of data
5.2 List of parameters
5.3 List of positioning data
5.4 List of start block data
5.5 List of condition data
5.6 List of monitor data
5.7 List of control data
Chapter 6 SEQUENCE PROGRAM USED
FOR POSITIONING CONTROL
Chapter 7 MEMORY CONFIGURATION
AND DATA PROCESS
* Understand the data process in the AD75 as necessary.
1) Understand the product functions and specifications,
and design the system.
2) Install and wire the product
3) Set the parameters
4) While referring to lists in "SECTION 2" and "Chapter 5",
set the data required for each control
Chapter 8 ZERO POINT RETURN
Chapter 9 MAIN POSITIONING
Chapter 10 ADVANCED
Chapter 11 MANUAL CONTROL
Chapter 12 CONTROL AUXILIARY
Chapter 13 COMMON FUNCTIONS
5) Create a sequence program for control
Chapter 14 TROUBLESHOOTING
6) Remedies for "Errors" and "Warnings"
A - 14
CONTROL
CONTROL
POSITIONING CONTROL
FUNCTIONS