Machine Zero Point Return Method - Mitsubishi A1SD75M3 User Manual

8 ZERO POINT RETURN CONTROL

8.2.2 Machine zero point return method

Pr.45
Zero point
return method
• When the zero point is passed between a machine zero point return start and deceleration
to a stop by the near-point dog ON to OFF
When the near-point dog turns from OFF to ON, the machine starts deceleration. (The
machine decelerates to "
to OFF, the machine stops at the first zero point*
Near-point dog
return.
• When the zero point is not passed between a machine zero point return start and
method
deceleration to a stop by the near-point dog ON to OFF
When the near-point dog turns from OFF to ON, the machine starts deceleration. (The
machine decelerates to "
OFF, the machine decelerates to a stop, resulting in "Zero point not pass at zero point
return" (error code: 210).
• When the zero point is passed between a machine zero point return start and deceleration
to a stop by the near-point dog ON to OFF
Same as in the "near-point dog method".
• When the zero point is not passed between a machine zero point return start and
deceleration to a stop by the near-point dog ON to OFF
Near-point dog
When the near-point dog turns from OFF to ON, the machine starts deceleration. (The
1
method 2) *
machine decelerates to "
OFF, the machine decelerates to a stop, and the servomotor is rotated one turn in the
opposite direction. (The zero point is passed.) The machine moves in the zero point
direction again, and after the near-point dog has turned from ON to OFF, the machine
stops at the first zero point*
moves at "
• When the zero point is passed from a machine zero point return start until the machine
moves the distance set to "
ON"
When the near-point dog turns from OFF to ON, the machine starts deceleration and
moves at "
After the machine has moved the distance set to "
after near-point dog ON" from the position where the near-point dog turned from OFF to
ON, the machine stops at the first zero point*
Count method 1)
• When the zero point is not passed from a machine zero point return start until the machine
moves the distance set to "
ON"
When the near-point dog turns from OFF to ON, the machine starts deceleration (The
machine decelerates to "
OFF, the machine decelerates to a stop, resulting in "Zero point not pass at zero point
return" (error code: 210).
When the near-point dog turns from OFF to ON, the machine starts deceleration and moves
at "
Count method 2) The machine stops in the position where the distance set to "
amount after near-point dog ON" is reached from the position where the near-point dog
turned from OFF to ON, completing the machine zero point return.
The method by which the machine zero point is established (method for judging the
zero point position and machine zero point return completion) is designated in the
machine zero point return according to the configuration and application of the
positioning method.
The following table shows the six methods that can be used for this zero point return
method.
(The zero point return method is one of the items set in the zero point return
parameters. It is set in " Pr.45 Zero point return method" of the basic parameters for
zero point returns.)
Pr.49
Pr.49
Pr.49
2
, completing the machine zero point return. (The machine
Zero point return speed".)
Pr.48
Pr.52
Pr.49 Creep speed".
Pr.52
Pr.49
Creep speed".
Pr.49
Operation details
Creep speed".) After the near-point dog has turned from ON
2
, completing the machine zero point
Creep speed".) When the near-point dog turns from ON to
Creep speed".) When the near-point dog turns from ON to
Setting for the movement amount after near-point dog
Setting for the movement amount
Pr.52
2
, completing the machine zero point return.
Setting for the movement amount after near-point dog
Creep speed".) When the near-point dog turns from ON to
Pr.52
8 - 5
MELSEC-A
Setting for the movement
Remarks
Use this method
in the system
where the zero
point can always
be passed
between a
machine zero
point return start
and the near-
point dog ON to
OFF.
Use this method
in the system
where the "near-
point dog
method" cannot
be used.
Use this method
in the system
where the zero
point can always
be passed
between a
machine zero
point return start
and the near-
point dog ON to
OFF.