Hwping Commands; Hwping Client Commands; Count - H3C s3600 series Command Manual

1

HWPing Commands

The configuration of eight test types, including DHCP, FTP, HTTP, DNS, SNMP, Jitter, TCP and
UDP tests is added. For the detailed configuration of these tests, refer to the introduction in this
chapter.
The configuration of the maximum number of history records that can be saved in a test group is
added. For the detailed configuration, refer to section history-records.

HWPing Client Commands

count

Syntax
count times
undo count
View
HWPing test group view
Parameters
times: Number of probes in each HWPing test. The times argument ranges from 1 to 15.
Description
Use the count command to set the number of probes in each HWPing test.
Use the undo count command to restore the default.
For tests except jitter test, only one packet is sent in a probe. In a jitter test, you can use the
jitter-packetnum command to set the number of packets to be sent in a probe.
By default, the number of probes in each test is 1.
Related commands: frequency.
Examples
# Set the number of probes made in an ICMP test to 10.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] hwping administrator icmp
[Sysname-hwping-administrator-icmp] test-type icmp
1-1