H3C s3600 series Command Manual page 1120

Enabling of this function consumes some amounts of CPU resources. Therefore, if your network has a
high CPU usage requirement, you can disable this function to save your CPU resources.
Examples
# Disable real-time monitoring of the running status of the system.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] undo system-monitor enable
update fabric
Syntax
update fabric { file-url | device-name }
View
User view
Parameters
file-url: Path plus name of a host software file in the Flash, a string of 1 to 64 characters.
device-name: File name, in the form of unit[NO.]>flash:, which is used to indicate that the specified file
is stored in the Flash of a specified switch.
Description
Use the update fabric command to upgrade the host software of all devices in a Fabric.
Examples
# Use the file named s3600.bin in the Flash memory of Unit 2 to upgrade the host software of the
devices in a Fabric.
<Sysname> update fabric unit2>flash:/s3600.bin
This will update the Fabric. Continue? [Y/N] y
The software is verifying ...
The result of verification is :
Unit ID Free space(bytes)
1
2
warning: the verification is completed, start the file transmission? [Y/N] y
The fabric is being updated,
The s3600.bin is stored on unit 1 successfully!
The s3600.bin is stored on unit 2 successfully!
Do you want to set s3600.bin to be running agent next time to boot?[Y/N] y
The s3600.bin is configured successfully!
Enough
15281873
15409873
100%
Version comparison
Y Y
Y Y
3-21