Barometer And Altimeter - SSANGYONG RODIUS Owner's Manual

Ofrecido por www.electromanuales.com

BAROMETER AND ALTIMETER

Altimeter
Barometer
Indication of relative altimeter
Absolute Altimeter
It indicates the current altitude from sea level (0 m) by every
20 m.
• Indication range: -200 m ~ 2,800 m
• How to calibrate the absolute altitude
Press UP button: increase by 20 m
Press DOWN button: decrease by 20 m
• Absolute altitude calibration range
- 200 m ~ 320 m
• How to erase the calibrated altitude value
Press the UP and DOWN buttons simultaneously for more
than 1 second to cancel the altitude calibration.
4 - 2 8
INTERIOR SWITCHES
Barometer and Altimeter (relative altitude, absolute altitude)
Barometer
It indicates the current atmospheric pressure in range from 720 hpa to 1045 hpa
by 1 hpa.
Altimeter
It indicates the absolute altitude or relative altitude. Press and hold the MODE
button for more than 1 second to switch over the mode between absolute altim-
eter and relative altimeter in direction/atmospheric pressure/altitude mode.
Relative Altimeter
• It shows the specific area's relative altitude based on the
current altitude of the vehicle and shows by every 20 m.
• In relative altimeter mode, reset the relative altitude to 0 m
by using UP or DOWN button. The relative altimeter shows
the destination's relative altitude after arrival.
NOTE
0 m above the sea level is equivalent to 1013.25 hpa and the altimeter
convert the difference between this pressure and atmospheric pres-
sure to absolute altitude or relative altitude.