Show Interfaces Ets - Dell C9000 Series Reference Manual

Version
9.0.2.0
8.3.19.0
8.3.12.0
8.3.16.0

show interfaces ets

Displays the ETS configuration applied to egress traffic on an interface, including priority groups with priorities
and bandwidth allocation.
C9000 Series
Syntax
show interface port-type slot/port ets {summary | detail}
Parameters
port-type slot/
port ets
{summary | detail}
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant
Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.0.2.0
9.2(0.2)
8.3.19.0
8.3.12.0
8.3.16.0
Usage Information To clear ETS TLV counters, use the clear ets counters interface port-type slot/port
command.
To view the ETS show output for multiple ports of a specified slot, you can specify any random
port number or a range of ports, or a combination of both.
Description
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the port-type slot and port ETS information.
Enter the keyword summary for a summary list of results or enter the
keyword detail for a full list of results.
Description
Introduced on the C9010.
Introduced on the S6000.
Down status messages added.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.
Data Center Bridging (DCB) 700