Point Symbols; Symbol Description - Leica GPS1200+ Technical Reference Manual

Geodetic satellite receiver

Hide thumbs Also See for GPS1200+:

Table of Contents

MapView Interactive Display Feature

Point Symbols

When <Show Points: Yes> in XX MapView Configuration, points are displayed, in all

modes, according to their class.

3D control point is a point of class CTRL with full coordinate triplet.

2D control point is a position only point of class CTRL.

Adjusted point is a point of class ADJ.

Reference point is a point of class REF.

Average point is a point of class AVGE.

Measured point is a point of class MEAS.

Single Point Position uploaded from LGO.

Navigated point is a point of class NAV.

Estimated point is a point of class EST.

Calculated COGO point is a point of class MEAS or CTRL depending on the

COGO calculation method.

Points of class NONE or points of class CTRL/MEAS with a height only component cannot

be displayed in MapView.

A list of the point types available, and their description, is available by pressing SYMBL (F3)

in XX MapView Configuration, Points page. Refer to "33.3 Configuring MapView".