:FUNCtion:DISPlay
Command Syntax
:FUNCtion:DISPlay <display>
<display> ::= {{1 | ON} | {0 | OFF}}
The :FUNCtion:DISPlay command turns the display of the function on or
off. When ON is selected, the function performs as specified using the
other FUNCtion commands. When OFF is selected, function is neither
calculated nor displayed.
Query Syntax
:FUNCtion:DISPlay?
The :FUNCtion:DISPlay? query returns whether the function display is on
or off.
Return Format
<display><NL>
<display> ::= {1 | 0}
See Also
•
•
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see
page
1138)
"Introduction to :FUNCtion Commands"
":VIEW"
on page 225
":BLANk"
on page 198
":STATus"
on page 222
:FUNCtion Commands
on page 326
16
333