16
:FUNCtion Commands
:FUNCtion:DISPlay
Command Syntax
:FUNCtion:DISPlay <display>
<display> ::= {{1 | ON} | {0 | OFF}}
The :FUNCtion:DISPlay command turns the display of the function on or
off. When ON is selected, the function performs as specified using the
other FUNCtion commands. When OFF is selected, function is neither
calculated nor displayed.
Query Syntax
:FUNCtion:DISPlay?
The :FUNCtion:DISPlay? query returns whether the function display is on
or off.
Return Format
<display><NL>
<display> ::= {1 | 0}
See Also
•
•
•
•
280
(see
page
790)
"Introduction to :FUNCtion Commands"
":VIEW"
on page 182
":BLANk"
on page 158
":STATus"
on page 179
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
on page 278