Labels; To Turn The Label Display On Or Off - Agilent Technologies InfiniiVision 3000 User Manual

You can define labels and assign them to each analog input channel, or
you can turn labels off to increase the waveform display area. Labels can
also be applied to digital channels on MSO models.

To turn the label display on or off

1 Press the [Label] key on the front panel.
Agilent InfiniiVision 3000 X-Series Oscilloscopes
User's Guide
9

Labels

To turn the label display on or off
To assign a predefined label to a channel
To define a new label
To load a list of labels from a text file you create
To reset the label library to the factory default
This turns on labels for the displayed analog and digital channels.
Labels are displayed at the left edge of the displayed traces.
The figure below shows an example of displayed labels.
135
137
s1
136
138
139
135