Display:label - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

:DISPlay:LABel

Command Syntax
:DISPlay:LABel <value>
<value> ::= {{1 | ON} | {0 | OFF}}
The :DISPlay:LABel command turns the analog and digital channel labels
on and off.
Query Syntax
:DISPlay:LABel?
The :DISPlay:LABel? query returns the display mode of the analog and
digital labels.
Return Format
<value><NL>
<value> ::= {0 | 1}
See Also
•
•
Example Code
See complete example programs at:
starting on page 1217
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
(see page 1208)
"Introduction to :DISPlay Commands"
":CHANnel<n>:LABel"
' DISP_LABEL
' - Turns label names ON or OFF on the analyzer display.
myScope.WriteString ":DISPlay:LABel ON"
on page 310
on page 271
Chapter
:DISPlay Commands
' Turn on labels.
41, "Programming Examples,"
14
317