Print Mg 1000B Software And System Information; Co-Resident Call Server And Signaling Server Restart Commands - Avaya 1000 Installation And Commissioning Manual

Print MG 1000B software and system information

When the Branch Office (SBO) package 390 is equipped, the ISS and ISSP commands in LD 22
display system and software information for the Branch Office. If the SBO package is restricted, the
two commands provide information about the Call Server.
Table 43: LD 22 Print MG 1000B software and system information.
Prompt Response
REQ ISS ISSP
Co-resident Call Server and Signaling Server restart
commands
The following restart commands are supported on the Co-resident Call Server and Signaling Server.
Table 44: Restart commands
From
Linux Bash Shell
Call Server Overlay 135
Call Server PDT1/PDT2
Call Server VxWorks Shell (su)
June 2014
Print MG 1000B software and system information
Description
Print issue and release Print system, DepList, and patch
information
Command
Reboot
ini active
Sysload active
Reboot
Reboot -1
Reboot
Reboot -1
Branch Office Installation and Commissioning
Comments? infodev@avaya.com
Description
Shut down all processes and
restart Linux OS End result for the
Call Server is equivalent to a cold
start.
Invoke Call Server warm start
only. No impact to other Linux
processes.
Invoke Call Server cold start No
impact to other Linux processes.
Invoke Call Server warm start No
impact to other Linux processes.
Invoke Call server cold start No
impact to other Linux processes.
Invoke Call server warm start No
impact to other Linux processes.
Invoke Call Server cold start No
impact to other Linux processes.
205