Route-Map - Dell S4810 Reference Manual

match ip route-source
routers.
match metric
match route-type

route-map

Enable a route map statement and configure its action and sequence number. This command also places
you in ROUTE-MAP mode.
S4810
Syntax
route-map map-name [permit | deny] [sequence-number]
To delete a route map, use the no route-map map-name [permit | deny]
[sequence-number] command.
Parameters
map-name
permit
deny
sequence-
number
Defaults Not configured.
If you do not define a keyword (permit or deny) for the route map, the permit
action is the default.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Access Control Lists (ACL)
— redistributes routes that match routes advertised by other
— redistributes routes that match a specific metric.
— redistributes routes that match a route type.
Enter a text string of up to 140 characters to name the route
map for easy identification.
(OPTIONAL) Enter the keyword permit to set the route map
default as permit. If you do not specify a keyword, the default
is permit.
(OPTIONAL) Enter the keyword deny to set the route map
default as deny.
(OPTIONAL) Enter a number to identify the route map for
editing and sequencing with other route maps. You are
prompted for a sequence number if there are multiple
instances of the route map. The range is from 1 to 65535.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
283