Cam-Acl-Egress; Cam-Optimization - Dell S4810 Reference Manual

cam-acl-egress

Allocate CAM for egress ACLs.
S4810
Syntax
cam-acl-egress default | l2acl number ipv4acl number ipv6acl
number
Parameters
default
l2acl number
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command..
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0

cam-optimization

Optimize CAM utilization for QoS Entries by minimizing require policy-map CAM space.
S4810
Syntax
cam-optimization [qos]
Parameters
qos
Defaults Disabled.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Content Addressable Memory (CAM)
Reset egress CAM ACL entries to default settings.
Allocate space to each CAM region. The total space
allocated must equal 4. The ipv6acl range must be a factor of
2.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Optimize CAM usage for QoS.
505