Ipv6 Name-Server - Dell S4810 Reference Manual

Parameters
name
ipv6-address
Defaults Not configured.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.0.0
Version
8.3.19.0
Version 8.3.7.0
Version 8.4.2.1
Version 8.4.1.0

ipv6 name-server

Enter up to six IPv6 addresses of name servers. The order you enter the addresses determines the order
of their use.
S4810
Syntax
ipv6 name-server ipv6-address [ipv6-address2... ipv6-address6]
To remove a name server, use the no ipv6 name—server ipv6–address
command.
Parameters
ipv6-address
ipv6-address2...
ipv6-address6
Defaults none
932
Enter a text string to associate with one IP address.
Enter the IPv6 address (X:X:X:X::X) to be mapped to the
name.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the E-Series TeraScale.
Enter the IPv6 address (X:X:X:X::X) of the name server to be
used.
Note: The :: notation specifics successive hexadecimal fields
of zeros.
(OPTIONAL) Enter up to five more IPv6 addresses, in the
x:x:x:x::x format, of name servers to be used. Separate the
IPv6 addresses with a space.
IPv6 Basics