Dell S4810 Reference Manual page 891

Field
V
C
V Id
Mac Addr
Port
Example
Dell#show ip cam stack-unit 0 port-set 0 10.10.10.10/32 longer-
prefixes
Destination
----------------- -- -- - ------ --------------------
10.10.10.10
Dell#
Usage The following describes the show ip cam ecmp-group command shown in the
Information
following example.
Field
Prefix Length
Current Use
Initial Size
Example
Dell#show ip cam stack-unit 0 po 0 ecmp-group detail
(ECMP-Group)
Destination EC CG V C VId Mac-Addr
----------------- -- -- - ----- ---------------- -------------
1.1.1.2
2.1.1.2
1.1.1.1
2.1.1.1
1.1.1.0
2.1.1.0
100.1.1.
100.1.1.
IPv4 Routing
Description
Displays a 1 if the entry is valid and a 0 otherwise.
Displays the CPU bit. 1 indicates that a packet hitting this
entry is forwarded to the CP or RP2, depending on Egress
port.
Displays the VLAN ID. If the entry is 0, the entry is not part of
a VLAN.
Displays the next-hop router's MAC address.
Displays the egress interface. Use the second half of the
entry to determine the interface. For example, in the entry
17cl CP, the CP is the pertinent portion.
• CP = control processor
• Gi = Gigabit Ethernet interface
• Te = 10–Gigabit Ethernet interface
EC CG V C VId Mac-Addr
0 0 1 1 0 00:00:00:00:00:00
Description
Displays the prefix-length or mask for the IP address
configured on the linecard 0 port pipe 0.
Displays the number of routes currently configured for the
corresponding prefix or mask on the linecard 0 port pipe 0.
Displays the CAM size Dell Networking OS allocates for the
corresponding mask. Dell Networking OS adjusts the CAM
size if the number of routes for the mask exceeds the initial
allocation.
0 0 1 0 0 00:01:e8:8a:d6:58
0 0 1 0 0 00:01:e8:8a:d6:58
0 0 1 1 0 00:00:00:00:00:00
0 0 1 1 0 00:00:00:00:00:00
0 0 1 1 0 00:00:00:00:00:00
0 0 1 1 0 00:00:00:00:00:00
0 1 0 1 0 0 00:01:e8:8a:d6:58
0 1 0 1 0 0 00:01:e8:8a:d6:58
Port
3f01 CP
Port ECMP Group-Index
0004 Te 0/3
0009 Te 0/8
3f01 CP
3f01 CP
3f01 CP
3f01 CP
0004 Te 0/3
0009 Te 0/8
-
-
-
-
-
-
0
0
891