Dell S4810 Reference Manual page 789

E-Series legacy
command
Usage The following describes the show interfaces switchport command for the
Information following example.
Items
Name
802.1QTagged
Vlan membership
Example
Dell#show interfaces switchport
Name: GigabitEthernet 13/0
802.1QTagged: Hybrid
Vlan membership:
Vlan
Native VlanId: 20
Name: GigabitEthernet 13/1
802.1QTagged: True
Vlan membership:
Vlan
Name: GigabitEthernet 13/2
802.1QTagged: True
Vlan membership:
Vlan
Name: GigabitEthernet 13/3
802.1QTagged: True
Vlan membership:
Vlan
--More--
Related
interface
Commands
show ip interface
show interfaces
interface.
show interfaces transceiver
an installed transceiver. The output also displays the transceiver's serial number.
Interfaces
Description
Displays the interface's type, slot, and port number.
Displays whether if the VLAN tagged ("True"), untagged
("False"), or hybrid ("Hybrid"), which supports both untagged
and tagged VLANs by port 13/0.
Lists the VLANs to which the interface is a member. Starting
with Dell Networking OS version 7.6.1, this field can display
native VLAN membership by port 13/0.
2, Vlan 20
2
2
2
— configures a physical interface on the switch.
— displays Layer 3 information about the interfaces.
— displays information on a specific physical interface or virtual
— displays the physical status and operational status of
789