Dell S4810 Reference Manual page 510

0 | 1 | IPv4Flow | 102 | 0| Allowed
Dell#
Usage
The following describes the test cam-usage command shown in the Example
Information
below.
Term
Stack-Unit
Portpipe
CAM Partition
Available CAM
Estimated CAM
per Port
Status
Example (S-
FTOS#test cam-usage service-policy input LauraIn stack-unit all
Series)
Stack-Unit|Portpipe|CAM Partition|AvailableCAM|EstimatedCAM
per Port|Status
---------------------------------------------------------------
---------
102|
102|
FTOS#
!
FTOS#test cam-usage service-policy input LauraIn stack-unit 0 port-
set 1
Stack-Unit|Portpipe|CAM Partition|Available CAM|EstimatedCAM
per Port|Status
---------------------------------------------------------------
-----------
102|
FTOS#
510
Explanation
Lists the stack unit or units that are checked. Entering all
shows the status for all stacks.
Lists the portpipe (port-set) or port pipes (port-sets) that are
checked. Entering all shows the status for linecards and
port-pipes in the chassis.
Shows the CAM profile of the CAM.
Identifies the amount of CAM space remaining for that
profile.
Estimates the amount of CAM space the listed policy will
require.
Indicates whether or not the policy will be allowed in the
CAM.
0| 0| IPv4Flow|
0|Allowed
0| 1| IPv4Flow|
0|Allowed
0| 1| IPv4Flow|
0|Allowed
Content Addressable Memory (CAM)