Gvrp Enable; Gvrp Registration - Dell S4810 Reference Manual

gvrp enable

Enable GVRP on physical interfaces and LAGs.
S4810
Syntax
gvrp enable
To disable GVRP on the interface, use the no gvrp enable command.
Defaults Disabled.
Command CONFIGURATION-INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Related disable
Commands

gvrp registration

Configure the GVRP register type.
S4810
Syntax
gvrp registration {fixed | normal | forbidden}
To return to the default, use the gvrp register normal command.
Parameters
fixed
normal
forbidden
692
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on C-Series, E-Series, and S-Series
— globally disables GVRP.
Enter the keyword fixed then the VLAN range in a comma-
separated VLAN ID set.
Enter the keyword normal then the VLAN range in a
comma-separated VLAN ID set. This setting is the default.
Enter the keyword forbidden then the VLAN range in a
comma-separated VLAN ID set.
GARP VLAN Registration (GVRP)