Redistribute Ospf - Dell S4810 Reference Manual

Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version
8.3.12.0
Version 7.5.1.0
Version 6.3.1.0
Usage BGP to IS-IS redistribution supports "match" options using route maps. You can set
Information the metric value, level, and metric-type of redistributed routes by the redistribution
command. You can "set" more advanced options using route maps.
Example
FTOS(conf)#router is
FTOS(conf-router_isis)#redistribute bgp 1 level-1 metric 32
metric-type
external route-map rmap-isis-to-bgp
FTOS(conf-router_bgp)#show running-config isis
!
router isis
redistribute bgp 1 level-1 metric 32 metric-type external
route-map
rmap-isis-to-bgp

redistribute ospf

Redistribute routing information from an OSPF process.
S4810
Syntax
redistribute ospf process-id [level-1| level-1-2 | level-2]
[match {internal | external}] [metric metric-value] [metric-
type {external | internal}] [route-map map-name]
To return to the default values, use the no redistribute ospf process-id
[level-1| level-1-2 | level-2] [match {internal | external}]
[metric metric-value][metric-type {external | internal}]
[route-map map-name] command.
Parameters
process-id
metric metric-
value
1012
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for IPv6 ISIS.
Introduced.
Enter a number that corresponds to the OSPF process ID to
be redistributed. The range is from 1 to 65355.
(OPTIONAL) The value used for the redistributed route. Use a
metric value that is consistent with the destination protocol.
The range is from 0 to 16777215. The default is 0.
Intermediate System to Intermediate System (IS-IS)