Show Ip Ospf Database Nssa-External - Dell S4810 Reference Manual

LS age: 252
Options: (TOS-capability, No DC, E)
LS type: Network
Link State ID: 192.10.10.2
Advertising Router: 192.10.10.2
LS Seq Number: 0x80000007
Checksum: 0x4309
Length: 36
Network Mask: /24
Dell#
Related show ip ospf database
Commands

show ip ospf database nssa-external

Display NSSA-External (type 7) LSA information.
S4810
Syntax
show ip ospf [process-id | vrf vrf-name] database nssa-external
[link-state-id] [adv-router ip-address]
Parameters
process-id
vrf vrf-name
link-state-id
adv-router ip-
address
Command
•
Modes
•
Open Shortest Path First (OSPFv2 and OSPFv3)
Network (Area 0.0.0.1)
Attached Router: 192.10.10.2
Attached Router: 20.20.20.1
Attached Router: 20.20.20.5
— displays OSPF database information.
Enter the OSPF Process ID to show a specific process. If no
Process ID is entered, command applies only to the first
OSPF process.
Enter the keyword vrf followeed by the name of the VRF to
view NSSA-External LSA information corresponding to the
OSPF process that is tied to a specific VRF.
(OPTIONAL) Specify LSA ID in dotted decimal format. The
LSA ID value depends on the LSA type, and it can be one of
the following:
• the network's IP address for Type 3 LSAs or Type 5 LSAs
• the router's OSPF router ID for Type 1 LSAs or Type 4
LSAs
• the default destination (0.0.0.0) for Type 5 LSAs
(OPTIONAL) Enter the keywords adv-router and the ip-
address to display only the LSA information about that
router.
EXEC
EXEC Privilege
1211