Dell S4810 Reference Manual page 881

Parameters
vrf vrf-name
interface
interface
ip ip-address
mask
inspection
macaddress
mac-address
mask
static
retries
dynamic
summary
Command EXEC Privilege
Modes
IPv4 Routing
(OPTIONAL) Enter the keyword vrf and then the name of
the VRF.
NOTE: Use this attribute to start a BGP instance for either
a specific address family corresponding to the default
VRF or an IPv4 address family corresponding to a non-
default VRF.
(OPTIONAL) Enter the following keywords and slot/port or
number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet then the slot/port information.
• For the Management interface, enter the keyword
managementethernet then the slot/port information.
• For a Port Channel interface, enter the keyword port-
channel then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
• For a VLAN, enter the keyword vlan then a number from
1 to 4094.
(OPTIONAL) Enter the keyword ip then an IP address in the
dotted decimal format. Enter the optional IP address mask in
the slash prefix format (/ x).
Enter the keyword inspection with one of the following
keywords to view ARP entries:
• database — view a list of ARP entries learned using DAI
• statistics — view DAI statistics
(OPTIONAL) Enter the keyword macaddress then a MAC
address in nn:nn:nn:nn:nn:nn format. Enter the optional
MAC address mask in nn:nn:nn:nn:nn format also.
(OPTIONAL) Enter the keyword static to view entries
entered manually.
(OPTIONAL) Enter the keyword retries to show the
number of ARP retries before a 20–second back off.
(OPTIONAL) Enter the keyword dynamic to view dynamic
entries.
(OPTIONAL) Enter the keyword summary to view a summary
of ARP entries.
881