Show Fip-Snooping Fcf - Dell S4810 Reference Manual

show fip-snooping fcf

Display information on the FCFs in FIP-snooped sessions, including the FCF interface and MAC address,
FCF interface, VLAN ID, FC-MAP value, FKA advertisement period, and number of ENodes connected.
S4810
Syntax
show fip-snooping fcf [fcf-mac-address]
Parameters
fcf-mac-
address
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version
8.3.12.0
Usage The following describes the show fip-snooping fcf command shown in the
Information
following example.
Field
FCF MAC
FCF Interface
VLAN
FC-MAP
ENode Interface
FKA_ADV_PERIO
D
No of ENodes
FC-ID
Example
Dell# show fip-snooping fcf
FCF MAC
Enodes
------- ------------- ---- ------ -------------- -------------
668
Enter the MAC address of the FCF to display.
EXEC
EXEC Privilege
Introduced on the S4820T.
Introduced on the S4810.
Description
MAC address of the FCF.
Slot/port number of the interface to which the FCF is
connected.
VLAN ID number the session uses.
FC-Map value the FCF advertises.
Slot/ number of the interface connected to the ENode.
Time (in milliseconds) during which FIP keep-alive
advertisements transmit.
Number of ENodes connected to the FCF.
Fibre Channel session ID the FCF assigns.
FCF Interface VLAN FC-MAP FKA_ADV_PERIOD No. of
FCoE Transit