Example (VLT)
Dell#show ip mroute vlt
IP Multicast Routing Table
Flags: S – Synced
(*, 225.1.1.1), uptime 00:39:33 flags: S
Incoming interface: Vlan 10
Spanned outgoing interface list:
Vlan 20 (S)
Vlan 30
(50.1.1.2, 225.1.1.1), uptime 00:39:33 flags: S
Incoming interface: Vlan 10
Spanned outgoing interface list:
Vlan 20 (S)
Usage
The following describes the show ip mroute command shown in the following
Information
example.
Field
(S, G)
uptime
Incoming
interface
Outgoing
interface list:
Example
Dell#show ip mroute
IP Multicast Routing Table
(*, 224.10.10.1), uptime 00:05:12
(1.13.1.100, 224.10.10.1), uptime 00:04:03
(*, 224.20.20.1), uptime 00:05:12
Multicast
Description
Displays the forwarding entry in the multicast route table.
Displays the amount of time the entry has been in the
multicast forwarding table.
Displays the reverse path forwarding (RPF) information
towards the source for (S,G) entries and the RP for (*,G)
entries.
Lists the interfaces that meet one of the following:
•
a directly connected member of the Group
•
statically configured member of the Group
•
received a (*,G) or (S,G) Join message
Incoming interface: GigabitEthernet 3/12
Outgoing interface list:
GigabitEthernet 3/13
Incoming interface: GigabitEthernet 3/4
Outgoing interface list:
GigabitEthernet 3/12
GigabitEthernet 3/13
Incoming interface: GigabitEthernet 3/12
Outgoing interface list:
GigabitEthernet 3/4
1149