Dell S4810 Reference Manual page 1148

Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 9.2.
(0.0)
Version 8.4.1.1
Version
8.3.19.0
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
E-Series legacy
command
Example
Dell#show ip mroute static
(Static)
Mroute: 23.23.23.0/24, interface: Lo 2
Protocol: static, distance: 0, route-map: none, last change:
00:00:23
Example
Dell#show ip mroute snooping
(Snooping)
IPv4 Multicast Snooping Table
(*, 224.0.0.0), uptime 17:46:23
(*, 225.1.2.1), uptime 00:04:16
(165.87.1.7, 225.1.2.1), uptime 00:03:17
1148
EXEC
EXEC Privilege
Introduced on the S6000.
Added support for keyword vlt to the Z9000, S4810, and
S4820T.
Support for the keyword snooping and the optional vlan
vlan-id, group-address, and source-address
parameters were added on E-Series ExaScale.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Incoming vlan: Vlan 2
Outgoing interface list:
GigabitEthernet 4/13
Incoming vlan: Vlan 2
Outgoing interface list:
GigabitEthernet 4/11
GigabitEthernet 4/13
Incoming vlan: Vlan 2
Outgoing interface list:
GigabitEthernet 4/11
GigabitEthernet 4/13
GigabitEthernet 4/20
Multicast