Dcb-Map Stack-Unit All Stack-Ports All; Show Qos Dcb-Map - Dell S4810 Reference Manual

dcb-map stack-unit all stack-ports all

Apply the specified DCB map on all ports of the switch stack.
S4810
Syntax
dcb-map stack-unit all stack-ports all dcb-map-name
To remove the PFC and ETS settings in a DCB map from all stack units, use the no
dcb-map stack-unit all stack-ports all command.
Parameters
dcb-map-
name
Defaults None
Command CONFIGURATION
Modes
Command
Version 9.3(0.0)
History
Usage The dcb-map stack-unit all stack-ports all command overwrites any
Information
previous DCB maps applied to stack ports.

show qos dcb-map

Display the DCB parameters configured in a specified DCB map.
S4810
Syntax
show qos dcb-map map-name
Parameters
map-name
Command
•
Modes
•
Command
Version 9.3(0.0)
History
Version 9.3(0.0)
576
Enter the name of the DCB map.
Introduced on the S4810 and S6000 platforms.
Displays the PFC and ETS parameters configured in the
specified map.
EXEC
EXEC Privilege
Introduced on the S4810 and S6000 platforms.
Introduced on the FC Flex IO module installed in the MXL
10/40GbE Switch.
Data Center Bridging (DCB)