Dell S4810 Reference Manual page 816

Usage The following describes the show interfaces port-channel command shown
Information
in the following example.
Field
Port-Channel 1...
Hardware is...
Port-channel is
part...
Internet address...
MTU 1554...
LineSpeed
Members in this...
ARP type:...
Last clearing...
Queueing
strategy.
packets input...
Input 0 IP
packets...
0 64-byte...
Received 0...
Output 0...
Rate information...
Time since...
816
Description
Displays the LAG's status. In the Example, the status of the
LAG's LAG fate-sharing group ("Failover-group") is listed.
Displays the interface's hardware information and its
assigned MAC address.
Indicates whether the LAG is part of a LAG fate-sharing
group ("Failover-group").
States whether an IP address is assigned to the interface. If
an IP address is assigned, that address is displayed.
Displays link and IP MTU.
Displays the interface's line speed. For a port channel
interface, it is the line speed of the interfaces in the port
channel.
Displays the interfaces belonging to this port channel.
Displays the ARP type and the ARP timeout value for the
interface.
Displays the time when the show interfaces counters
were cleared.
States the packet queuing strategy. FIFO means first in first
out.
Displays the number of packets and bytes into the interface.
Displays the number of packets with IP headers, VLAN
tagged headers, and MPLS headers. The number of packets
may not add correctly because a VLAN tagged IP packet
counts as both a VLAN packet and an IP packet.
Displays the size of packets and the number of those
packets entering that interface. This information is displayed
over two lines.
Displays the type and number of errors or other specific
packets received. This information is displayed over three
lines.
Displays the type and number of packets sent out the
interface. This information is displayed over three lines.
Displays the traffic rate information into and out of the
interface. Traffic rate is displayed in bits and packets per
second.
Displays the time since the last change in the configuration
of this interface.
Interfaces