Dell S4810 Reference Manual page 959

Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version
8.3.12.0
Version
8.3.16.0
Example
Dell# show isci session detailed
Session 0 :
---------------------------------------------------
Target:iqn.2010-11.com.ixia:ixload:iscsi-TG1
Initiator:iqn.2010-11.com.ixia.ixload:initiator-iscsi-2c
Up Time:00:00:01:28(DD:HH:MM:SS)
Time for aging out:00:00:09:34(DD:HH:MM:SS)
ISID:806978696102
Initiator
IP Address TCP Port
10.10.0.44 33345
Session 1 :
----------------------------------------------------
Target:iqn.2010-11.com.ixia:ixload:iscsi-TG1
Initiator:iqn.2010-11.com.ixia.ixload:initiator-iscsi-35
Up Time:00:00:01:22(DD:HH:MM:SS)
Time for aging out:00:00:09:31(DD:HH:MM:SS)
ISID:806978696102
Initiator
IP Address TCP Port
10.10.0.53 33432
Related
•
Commands
•
•
iSCSI Optimization
EXEC
EXEC Privilege
Introduced on the S4820T.
Introduced on the S4810.
Introduced on MXL 10/40GbE Switch IO Module.
Initiator Target
Initiator Target
show iscsi — displays the currently configured iSCSI settings.
show iscsi session — displays information about active iSCSI sessions on the
switch.
show run iscsi — shows run iscsi.
Target
IP Address TCPPort ID
10.10.0.101 3260
Target
IP Address TCPPort ID
10.10.0.101 3260
Connection
0
Connection
0
959