Show Hardware Stack-Unit - Dell S4810 Reference Manual

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.0
Version 8.3.7.0
Version 7.8.1.0

show hardware stack-unit

Display the data plane or management plane input and output statistics of the designated component of
the designated stack member.
S4810
Syntax
stack-unit <id> {cpu data-plane statistics | cpu management
statistics | [ drops [unit number [port 1-104] | user-port
0-127] | fpga register | party-bus statistics | stack-port |
ti-monitor | unit 0-1 {counters | details | port-stats [detail]
| register}}
Parameters
stack-unit
stack-unit
{command-
option}
buffer
cpu data-plane
statistics
604
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Enter the keywords stack-unit to select a particular stack
member and then enter one of the following command
options to display a collection of data based on the option
entered. The range is 0 to 11.
Enter the keyword buffer. To display the total buffer
statistics for the stack unit, enter the keyword total-
buffer. To display the buffer statistics for a specific unit,
enter the keyword unit and a unit number 0 .
To display the buffer statistics for a specific port, enter the
keyword port and a port number from 1 to 64.
To display total buffer information for the port, enter the
keywords buffer-info. To display a queue range, enter 0
to 14 for a specfic queue or all.
(Optional) Enter the keywords cpu data-plane
statistics then the keywords stack port and its
number, from 0 to 63 to display the data plane statistics,
which shows the High Gig (Higig) port raw input/output
counter statistics to which the stacking module is
connected.
Debugging and Diagnostics