Ipv6 Nd Prefix - Dell S4810 Reference Manual

Version 8.3.11.1
Version 8.3.7.0

ipv6 nd prefix

Specify which IPv6 prefixes are included in Neighbor Advertisements.
S4810
Syntax
ipv6 nd prefix {ipv6-prefix | prefix-length | default} [no-
advertise] | [no-autoconfig] [no-rtr-address] [off-link]
[lifetime {valid | infinite} {preferred | infinite}]
Parameters
ipv6-prefix
prefix-length
default
no-advertise
no-autoconfig
no-rtr-address
off-link
valid-lifetime |
infinite
preferred-
lifetime |
infinite
Command INTERFACE
Modes
934
Introduced on the Z9000.
Introduced on the S4810.
Enter an IPv6 prefix.
Enter the prefix then the prefix length. The length range is
from 0 to 128.
Enter the keyword default to set default parameters for all
prefixes.
Enter the keyword no-advertise to prevent the specified
prefix from being advertised.
Enter the keywords no-autoconfig to disable Stateless
Address Autoconfiguration.
Enter the keyword no-rtr-address to exclude the full
router address from router advertisements (the R bit is not
set).
Enter the keywords off-link to advertise the prefix without
stating to recipients that the prefix is either on-link or off-
link.
Enter the amount of time that the prefix is advertised, or
enter infinite for an unlimited amount of time. The range
is from 0 to 4294967295. The default is 2592000. The
maximum value means that the preferred lifetime does not
expire for the valid-life time parameter.
Enter the amount of time that the prefix is preferred, or enter
infinite for an unlimited amount of time. The range is
from 0 to 4294967295. The default is 604800. The
maximum value means that the preferred lifetime and does
not expire.
IPv6 Basics