Show Cam-Acl-Vlan - Dell S4810 Reference Manual

Vlan Members :
Dell#

show cam-acl-vlan

Display the number of flow processor (FP) blocks that is allocated for the different VLAN services.
Syntax
show cam-acl-vlan
Command EXEC Privilege
Modes
Command
Version 9.3.
History
(0.0)
Usage After CAM configuration for ACL VLAN groups is performed, you must reboot the
Information system to enable the settings to be stored in nonvolatile storage. During the
initialization of CAM, the chassis manager reads the NVRAM and allocates the
dynamic VCAP regions.
The following table describes the output fields of this show command:
Field
Chassis Vlan Cam ACL
Stack Unit <number>
Current Settings(in block sizes)
VlanOpenFlow
VlanIscsi
VlanHp
VlanFcoe
352
Group5
1,1000
Introduced on the S4810, S4820T, Z9000 and MXL
platforms.
Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM)
Description
Details about the CAM blocks allocated
for ACLs for various VLAN operations at
a system-wide, global level.
Details about the CAM blocks allocated
for ACLs for various VLAN operations
for a particular stack unit.
Information about the number of FP
blocks that are currently in use or
allocated.
Number of FP blocks for VLAN open
flow operations.
Number of FP blocks for VLAN internet
small computer system interface
(iSCSI) counters.
Number of FP blocks for VLAN high
performance processes.
Number of FP blocks for VLAN Fiber
Channel over Ethernet (FCoE)
operations.