Version
8.3.19.0
Version
8.3.12.0
fip-snooping enable
Enable FIP snooping on all VLANs or on a specified VLAN.
S4810
Syntax
fip-snooping enable
To disable the FIP snooping feature on all or a specified VLAN, use the no fip-
snooping enable command.
Defaults
FIP snooping is disabled on all VLANs.
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version
8.3.12.0
Usage
The maximum number of FCFs supported per FIP snooping-enabled VLAN is four.
Information
The maximum number of FIP snooping sessions supported per ENode server is 16.
fip-snooping fc-map
Configure the FC-MAP value FIP snooping uses on all VLANs.
S4810
Syntax
fip-snooping fc-map fc-map-value
To return the configured FM-MAP value to the default value, use the no fip-
snooping fc-map command.
FCoE Transit
Introduced on the S4820T.
Introduced on the S4810.
CONFIGURATION
VLAN INTERFACE
Introduced on the S4820T.
Introduced on the S4810.
663