Dell S4810 Reference Manual page 1165

Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4(0.0)
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.8.0
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Usage The following describes the debug ip ospf command shown in the Example
Information
below.
Field
8:14
OSPF
v:
t:
l:
rid:
aid:
chk:
Open Shortest Path First (OSPFv2 and OSPFv3)
Added support for VRF.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Added the database-timer rate-limit option for the
S4810.
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Displays the time stamp.
Displays the OSPF process ID: instance ID.
Displays the OSPF version. Dell Networking OS supports
version 2 only.
Displays the type of packet sent:
• 1 - Hello packet
• 2 - database description
• 3 - link state request
• 4 - link state update
• 5 - link state acknowledgement
Displays the packet length.
Displays the OSPF router ID.
Displays the Autonomous System ID.
Displays the OSPF checksum.
1165