Dell S4810 Reference Manual page 784

1000Base-T
Control
Phy Specific
Control
Phy Specific
Status
Example
Dell#show int gigabitethernet 1/0 phy
Mode Control:
Mode Status:
AutoNegotation Advertise:
AutoNegotiation Remote Partner's Ability:
784
1000Base-T requires auto-negotiation. The IEEE Ethernet
standard does not support setting a speed to 1000 Mbps
with the speed command without auto-negotiation. E-
Series line cards support both full-duplex and half-duplex
1000BaseT.
Values are:
• 0 - Manual MDI
• 1 - Manual MDIX
• 2 - N/A
• 3 - Auto MDI/MDIX
Displays PHY-specific status information. Cable length
represents a rough estimate in meters:
• 0 - < 50 meters
• 1 - 50 - 80 meters
• 2 - 80 - 110 meters
• 3 - 110 - 140 meters
• 4 - 140 meters
Link Status: Up or Down
Speed:
• Auto
• 1000MB
• 100MB
• 10MB
SpeedSelection:
AutoNeg:
Loopback:
PowerDown:
Isolate:
DuplexMode:
AutoNegComplete:
RemoteFault:
LinkStatus:
JabberDetect:
100MegFullDplx:
100MegHalfDplx:
10MegFullDplx:
10MegHalfDplx:
Asym Pause:
Sym Pause:
100MegFullDplx:
100MegHalfDplx:
10MegFullDplx:
10b
ON
False
False
False
Full
False
False
False
False
True
True
False
True
False
False
False
False
False
Interfaces