Dell S4810 Reference Manual page 503

ecfmacl
number
Vman-qos|
vman-dual-qos
number
vman-dual-qos
number
Ipv4pbr
number
Openflow
number
fcoeacl
number
Iscsioptacl
number
vrfv4acl
number
l2acl number
ipv4acl number
ipv6acl
number,
ipv4qos
number l2qos
numberl2pt
number
ipmacacl
number
ecfmacl
number [vman-
qos | vman-
dual-qos
number]
ipv4pbr
numberopenflo
w {4|8} | fcoe
number
[iscsioptacl
number]
[vrfv4acl
number]
Command CONFIGURATION
Modes
Content Addressable Memory (CAM)
Enter the keyword ecfmacacl and then the number of FP
blocks for ECFM ACL. The range is from 0 to 5.
Enter the keyword evman-qos and then the number of FP
blocks for VMAN QoS. The range is from 0 to 6.
Enter the keyword vman-dual-qos and then the number of
FP blocks for VMAN dual QoS. The range is from 0 to 4.
Enter the keyword ipv4pbr and then the number of FP
blocks for ipv4pbr ACL. The range is from 0 to 8.
Enter the keyword openflow and then the number of FP
blocks for open flow (multiples of 4). The range is from 0 to
8.
Enter the keyword fcoeacl and then the number of FP
blocks for FCOE ACL. The range is from 0 to 6.
Enter the keyword iscsioptacl and then the number of FP
blocks for iSCSI optimization ACL. The range is from 0 to 2.
Enter the keyword vrfv4acl and then the number of FP
blocks for VRF IPv4 ACL. The range is from 0 to 2.
Allocate space to each CAM region.
Enter 4 or 8 for the number of OpenFlow FP blocks.
• 4: Creates 242 entries for use by the OpenFlow controller
(256 total entries minus the 14 entries reserved for
internal functionality)
• 8: Creates 498 entries for use by the OpenFlow controller
(512 total entries minus the 14 entries reserved for
internal functionality)
The fcoe range is 0–6 groups. Each group has 128 entries;
the value given must be an even number. This information is
stored in the NVRAM and is effective after rebooting the
switch.
503