Dell S4810 Reference Manual page 551

Parameters
port-type slot/
port ets
{summary |
detail}
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 9.2(0.2)
Version
8.3.19.0
Version
8.3.12.0
Version
8.3.16.0
Example
Dell(conf-qos-policy-out-ets)#show interface te 0/3 ets de
(Summary)
Interface TenGigabitEthernet 0/3
Max Supported TC Groups is 4
Number of Traffic Classes is 8
Admin mode is on
Admin Parameters :
------------------
Admin is enabled
TC-grp Priority#
------------------------------------------------
0
1
2
3
4
5
6
7
Remote Parameters :
-------------------
Remote is disabled
Local Parameters :
------------------
Local is enabled
TC-grp Priority#
------------------------------------------------
Data Center Bridging (DCB)
Enter the port-type slot and port ETS information.
Enter the keyword summary for a summary list of results or
enter the keyword detail for a full list of results.
Introduced on the S6000.
Down status messages added.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.
Bandwidth
-
0,1,2 100%
3 0 %
4,5,6,7 0 %
-
-
-
-
Bandwidth TSA
TSA
-
ETS
SP
SP
-
-
-
-
551