Iscsi Profile-Compellant; Iscsi Target Port - Dell S4810 Reference Manual

Version
8.3.16.0

iscsi profile-compellant

Configure the auto-detection of Dell Compellent arrays on a port.
S4810
Syntax
iscsi profile-compellent
Defaults Dell Compellent disk arrays are not detected.
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version
8.3.12.0
Version
8.3.16.0

iscsi target port

Configure the iSCSI target ports and optionally, the IP addresses on which iSCSI communication is
monitored.
S4810
Syntax
iscsi target port [tcp-port-2...tcp-port-16]ip-address [ip-
address]
To remove the configured iSCSI target ports or IP addresses, use the no iscsi
target port command.
iSCSI Optimization
Introduced on MXL 10/40GbE Switch IO Module.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on MXL 10/40GbE Switch IO Module.
955