Bfd Disable; Bfd Enable (Configuration) - Dell S4810 Reference Manual

Related
bfd neighbor
Commands
group.
neighbor bfd disable
BGP peer group.

bfd disable

Disable BFD on an interface.
S4810
Syntax
bfd disable
Re-enable BFD using the no bfd disable command.
Defaults BFD is disabled by default.
Command VRRP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(0.2)
Version 9.0.0.0
Version
8.3.19.0
Version 8.2.1.0
Version 7.6.1.0
Version 7.5.1.0

bfd enable (Configuration)

Enable BFD on all interfaces.
S4810
Syntax
bfd enable
Disable BFD using the no bfd enable command.
Bidirectional Forwarding Detection (BFD)
— Explicitly enables a BFD session with a BGP neighbor or a BGP peer
— Explicitly disables a BFD session with a BGP neighbor or a
Introduced on S4810.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
Introduced on the E-Series.
363