Graceful-Restart T1 - Dell S4810 Reference Manual

Parameters
seconds
Defaults 30 seconds
Command ROUTER ISIS
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 8.3.1.0
Related graceful-restart t3
Commands completes.

graceful-restart t1

Set the graceful restart wait time before unacknowledged restart requests are generated. This wait time is
the interval before the system sends a restart request (an IIH with RR bit set in Restart TLV) until the CSNP
is received from the helping router.
S4810
Syntax
graceful-restart t1 {interval seconds | retry-times value}
To return to the default, use the no graceful-restart t1 command.
Parameters
interval
retry-times
Defaults Refer to Parameters.
Intermediate System to Intermediate System (IS-IS)
Enter the graceful restart time in seconds. The range is from
5 to 300 seconds. The default is 30 seconds.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series.
— configures the overall wait time before graceful restart
Enter the keyword interval to set the wait time. The range
is from 5 to 120 seconds. The default is 5 seconds.
Enter the keywords retry-times to set the number of
times the request interval is extended until a CSNP is
received from the helping router. The range is from 1 to 10
attempts. The default is 1.
981