Dell S4810 Reference Manual page 1225

vrf vrf-name
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Usage The following describes the show ip ospf process-id neighbor command
Information
shown in the following example.
Item
Neighbor ID
Pri
State
Dead Time
Address
Interface
Area
Example
Dell#show ip ospf 34 neighbor
Neighbor ID Pri State
20.20.20.7
192.10.10.2 1 FULL/DR
Open Shortest Path First (OSPFv2 and OSPFv3)
Enter the keyword vrf followed by the name of the VRF to
show information corresponding to the OSPF neighbors that
are tied to a specific VRF.
Added support for VRF.
Introduced on the S6000..
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Displays the neighbor router ID.
Displays the priority assigned neighbor.
Displays the OSPF state of the neighbor.
Displays the expected time until FTOS declares the neighbor
dead.
Displays the IP address of the neighbor.
Displays the interface type slot/port information.
Displays the neighbor's area (process ID).
Dead Time Address
1 FULL/DR 00:00:32 182.10.10.3 Gi 0/0 0.0.0.2
00:00:37 192.10.10.2 Gi 0/1 0.0.0.1
Interface Area
1225