Show Ip Dhcp Configuration; Show Ip Dhcp Conflict - Dell S4810 Reference Manual

Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0

show ip dhcp configuration

Display the DHCP configuration.
S4810
Syntax
show ip dhcp configuration [global | pool name]
Parameters
pool name
global
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0

show ip dhcp conflict

Display the address conflict log.
S4810
Syntax
show ip dhcp conflict address
Parameters
address
Defaults none
Command EXEC Privilege
Modes
Dynamic Host Configuration Protocol (DHCP)
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Display the configuration for a DHCP pool.
Display the DHCP configuration for the entire system.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Display a particular conflict log entry.
625