Dell S4810 Reference Manual page 457

Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Usage
To view the total number of COMMUNITY attributes found, use the show ip bgp
Information
summary command. The text line above the route table states the number of
COMMUNITY attributes found.
The show ip bgp community command without any parameters lists BGP
routes with at least one BGP community attribute and the output is the same as for
the show ip bgp command output.
The following describes the show ip bgp community command shown in the
following example.
Field
Network
Next Hop
Metric
LocPrf
Weight
Path
Example
Dell#show ip bgp community ?
local-AS
known community)
no-advertise
known community)
no-export
community)
aa:nn
|
Border Gateway Protocol
Added support for VRF.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Description
Displays the destination network prefix of each BGP route.
Displays the next hop address of the BGP router. If 0.0.0.0 is
listed in this column, then local routes exist in the routing
table.
Displays the BGP route's metric, if assigned.
Displays the BGP LOCAL_PREF attribute for the route.
Displays the route's weight.
Lists all the ASs the route passed through to reach the
destination network.
Do not export outside local AS (well-
Do not advertise to any peer (well-
Do not export to next AS (well-known
Community number in aa:nn format
Pipe through a command
457