Redundancy Synchronize - Dell S4810 Reference Manual

-- Switch Fabric Modules --
Slot Status
--------------------------------------
0
1
Dell#configure
Dell(conf)#redundancy sfm standby
Taking secondary SFM offline...
!
Dell(conf)#do show sfm all
Switch Fabric State: up
-- Switch Fabric Modules --
Slot Status
-----------------------------------------
0
1
Dell(conf)#no redundancy sfm
Taking secondary SFM online...
!
10Dell(conf)#do show sfm all
Switch Fabric State: up
-- Switch Fabric Modules --
Slot Status
-------------------------------------------
0
1

redundancy synchronize

Manually synchronize data once between the Primary RPM and the Secondary RPM.
S4810
Syntax
redundancy synchronize [full | persistent-data | system-data]
Parameters
full
persistent-data
system-data
Default Not configured.
Command EXEC Privilege
Modes
High Availability (HA)
active
active
active
standby
active
active
Enter the keyword full to synchronize all data.
Enter the keywords persistent-data to synchronize the
startup configuration between RPMs.
Enter the keywords system-data to synchronize persistent-
data and the running configuration file, event log, SFM and
line card states.
707