Description; Match As-Path - Dell S4810 Reference Manual

description

Add a description to this route map.
S4810
Syntax
description {description}
To remove the description, use the no description {description}
command.
Parameters
description
Defaults none
Command ROUTE-MAP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
pre-Version
7.7.1.0
Related route-map
Commands

match as-path

To match routes that have a certain AS number in their BGP path, configure a filter.
S4810
Syntax
match as-path as-path-name
To delete a match AS path filter, use the no match as-path as-path-name
command.
Parameters
as-path-name
272
Enter a description to identify the route map (80 characters
maximum).
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced.
— enables a route map.
Enter the name of an established AS-PATH ACL, up to 140
characters.
Access Control Lists (ACL)