Default-Metric - Dell S4810 Reference Manual

Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Related redistribute
Commands

default-metric

Change the metrics of redistributed routes to a value useful to OSPF. Use this command with the
redistribute command.
S4810
Syntax
default-metric number
To return to the default values, use the no default-metric [number]
command.
Parameters
number
Defaults Disabled.
Command ROUTER OSPF
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Related redistribute
Commands
1168
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— redistributes routes from other routing protocols into OSPF.
Enter a number as the metric. The range is from 1 to
16777214.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— redistributes routes from other routing protocols into OSPF.
Open Shortest Path First (OSPFv2 and OSPFv3)