Description - Dell S4810 Reference Manual

mode and the metric value in the default-information originate command
is set to a number higher than 63, the metric value advertised in the LSPs is 63. If
the metric-style command is set for Wide mode, the metric value in the
default-information originate command is advertised.
Related
•
Commands
•
•
•

description

Enter a description of the IS-IS routing protocol.
S4810
Syntax
description {description}
To remove the description, use the no description {description}
command.
Parameters
description
Defaults none
Command ROUTER ISIS
Modes
Command
Version 9.0.2.0
History
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
pre-7.7.1.0
Related router isis
Commands
Intermediate System to Intermediate System (IS-IS)
redistribute — redistributes routes from one routing domain to another routing
domain.
isis metric — configures a metric for an interface.
metric-style — sets the metric style for the router.
show isis database — displays the IS-IS link state database.
Enter a description to identify the IS-IS protocol (80
characters maximum).
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced.
— Enter ROUTER mode on the switch.
973